The principle and structure of the pump
The principle of the pump is:
The inflator is an air pump that draws air into the storage area by drawing, and then injects or replenishes the air required by various tires and some balls by pushing. When using an inflator, connect its outlet tube to the valve of the bicycle tire. The function of the valve is to only allow air to enter the tire from the inflator, and not allow air to flow back into the inflator from the tire.
The new type of pump with a sliding outer tube is the simplest one-way valve. When the outer tube is lifted up, the air enters the cylinder from the small hole on the lower end of the outer tube of the cylinder. When the handle is pressed down, the gas will enter the cylinder through the one-way valve set at the top of the inner tube. The inner tube follows the leather tube into the tire valve.
When the handle is lifted up again for the second time, the one-way valve is closed, and when the pressure is pressed down again, the air rushes through the one-way valve into the tire. In this way, the tires can be pumped up and down.
The characteristics of the pump are:
1. The pump is suitable for inflating bicycles, basketball, volleyball, football and other ball and bicycles. It has versatility, compact design and strong structure.
2. The high-pressure pump can be used for front and rear shock absorbers or as a general mini pump.
3. In addition to changing the angle of the pump hose, the joint can be rotated 360 degrees to facilitate pumping at any angle.
4. The quality of stainless steel pump is high. Stainless steel has the advantages of strong oxidation resistance, long service life, not easy to rust, anti-corrosion, not easy to deform, lead-free safety, high hardness, wear resistance, etc., durable and widely used in various Kinds of balls, bicycles, motorcycles, etc.
The inflator is an air pump that draws air into the storage area by drawing, and then injects or replenishes the air required by various tires and some balls by pushing. When using an inflator, connect its outlet tube to the valve of the bicycle tire. The function of the valve is to only allow air to enter the tire from the inflator, and not allow air to flow back into the inflator from the tire.
The new type of pump with a sliding outer tube is the simplest one-way valve. When the outer tube is lifted up, the air enters the cylinder from the small hole on the lower end of the outer tube of the cylinder. When the handle is pressed down, the gas will enter the cylinder through the one-way valve set at the top of the inner tube. The inner tube follows the leather tube into the tire valve.
When the handle is lifted up again for the second time, the one-way valve is closed, and when the pressure is pressed down again, the air rushes through the one-way valve into the tire. In this way, the tires can be pumped up and down.
The characteristics of the pump are:
1. The pump is suitable for inflating bicycles, basketball, volleyball, football and other ball and bicycles. It has versatility, compact design and strong structure.
2. The high-pressure pump can be used for front and rear shock absorbers or as a general mini pump.
3. In addition to changing the angle of the pump hose, the joint can be rotated 360 degrees to facilitate pumping at any angle.
4. The quality of stainless steel pump is high. Stainless steel has the advantages of strong oxidation resistance, long service life, not easy to rust, anti-corrosion, not easy to deform, lead-free safety, high hardness, wear resistance, etc., durable and widely used in various Kinds of balls, bicycles, motorcycles, etc.